GM 2.5 LK0 P050D: injector replacement plus PCM update branch. See the manufacturer document, vehicle conditions, exclusions and questions for a qualified shop before assuming a repair.
This is a research summary of a manufacturer communication, not a diagnosis for your car, a DIY repair procedure or confirmation of warranty or recall eligibility. No qualified technician has approved a repair for your individual vehicle here.
This historical communication is conditional. The current revision, VIN/build eligibility, measured diagnosis and any warranty or recall decision are not established here. Ask the manufacturer or a qualified shop to check the complete current document.
Read the General Motors original: LK0 P050D fuel injectors and PCM update · Check open recalls by VIN at NHTSA Source date: 2025-03; research checked: 2026-11-01.
What prompted this manufacturer document
- Cold-start rough idle with current/history P050D
- This bulletin specifies injectors plus PCM programming for the identified cohort while explicitly saying the root cause was still under investigation.
Which vehicle conditions must be checked
Each row below retains its own conditions. Do not combine engines, years or models across rows to create new applications. A listed model is not proof that a particular VIN is affected.
- Buick Enclave · 2025 · 2.5L LK0; gasoline
- Chevrolet Traverse · 2024, 2025 · 2.5L LK0; gasoline
- GMC Acadia · 2024, 2025 · 2.5L LK0; gasoline
Codes recorded in this document
A root listed only as an appearance has no separately verified meaning here. Preserve every suffix and module name; a shared root does not transfer a repair branch to another vehicle.
| Root | Raw form | Meaning in this source, if established |
|---|---|---|
| P050D | P050D | Appears in the document; individual meaning not verified |
What an owner can record safely
- Cold-start video from a safe parked position
- Stored and history codes
- Previous injector/software repairs
Editorial safety boundary for this system
Rough running, persistent white exhaust with coolant loss, significant noise or overheating warrants stopping and professional evaluation.
- Use current model-specific service information, calibrated equipment and a qualified technician for the selected diagnostic branch.
- Avoid repeated cranking after an engine stops or mechanical failure is suspected.
This is a conservative editorial policy, not a manufacturer safe-to-drive decision for a specific vehicle.
What the source does not prove
- Do not rewrite “under investigation” as a confirmed universal design defect. This is not the V8 coolant-intrusion branch.
- A code or message alone does not establish a failed part, a safe-to-drive decision or an approved repair for this VIN.
- A service bulletin is not automatically a recall or free warranty repair. Confirm current eligibility directly.
Questions for the repair shop
- Which current manufacturer procedure, VIN/RPO/build gate and test result determine the diagnostic branch?
- Does a later revision or a current recall change the source's original advice?
- What measurement or inspection confirms the cause, and how will the repair be verified?
Read the original record
The linked communication may be revised after the research date. Compare its document number, exact vehicle table, diagnostic preconditions and exclusions with a qualified technician. This page paraphrases selected facts and does not reproduce the manufacturer procedure.
Sources and scope
- General Motors — LK0 P050D fuel injectors and PCM update (24-NA-244) Document: 2025-03 · Research checked: 2026-11-01
Research snapshot: 2026-11-01. Source documents may have newer revisions. Verify current instructions and VIN eligibility with the manufacturer.